|
|
|
|
|
|
|
|
|
|
|
|
|
Crown Heritage Tapered Baluster - 5016 Series
The Crown Heritage 5016 baluster gives your stairs an elegant look with its round, tapered
sides and square bottom. Made from fir, this tapered wooden staircase baluster is strong
enough to provide long lasting support. The 5016 series wood baluster is available in 6
lengths: 31, 34, 36, 39, 42 and 45 inches. The tapered section accounts for about ¾ of the
total length of this piece. A pin on the bottom of the spindle makes it easy to install.
When you order a 5016 wood baluster replacement, you will receive it primed and ready for a
coat of paint. This baluster is not water resistant, and is intended for indoor use only.
|
5015: Wooden Pin-Top Baluster
The 5015 wooden pin top baluster is a colonial-style handrail support that works well in both traditional- and contemporary-style staircases. A square base makes this colonial pin top stair baluster compatible with square shoes, or it can be installed directly to stairs using a newel post attachment kit.
The 5015 wood tapered staircase baluster is available in beech, poplar and red oak. You can also order these posts with a primed finish, ready to be painted to match your décor. We carry the 5015 series wooden baluster in three lengths: 34, 38 and 42 inches. StairPartPros requires a minimum order of three balusters when buying this product.
|
5891: Pin Top Baluster. Available in 34", 36", 39", and 42".
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Simple Wooden Staircase Balusters - 5060 Series
If you’re looking for simple wooden staircase balusters, consider using 5060 series wooden spindles from Stair Parts Pros. You can match these to almost any staircase, because we offer these spindles in several woods, including beech, hemlock, maple, poplar, red oak and white oak. We also offer primed 5060 wood square balusters that are ready to be painted to match or complement your staircase.
We offer 5060 wooden square spindles in 36 and 42 inch lengths. Both sizes of spindles measure 1 ¼ by 1 ¼ inches. Building an entire staircase railing? If you order over 150 lbs. of these balusters, they will be shipped by freight.
|
5142 Square Top Baluster
Stair Part Pros has the square top modern staircase balusters you need to get the look you
want. 5142 wood stair spindles are available in 31, 35, 37.5, 39 and 42 inch lengths. You can
get these wooden square top stair balusters in beech, maple and red oak. We also offer
primed 5142 square top balusters, so you can paint them to match the rest of your staircase.
These spindles have a 6 ¾ inch top and 7 ½ inch bottom square sections, regardless of total
length. A ½ inch pin on the base of each post makes them easy to install.
|
5141: Square Top Baluster. Available in 34", 38", and 42".
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5067: Square Top Baluster. Available in 34", 38", and 42".
|
5894: Pin Top Baluster. Available in 34", 36", 39", and 42".
|
8075: Riser. 3/4" thick x 7.5" high.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5892: Pin Top Baluster. Available in 34", 36", 39", and 42".
|
C8075 Stair Riser Boards
Riser boards are frequently bumped and kicked as people go up and down stairs, making them as susceptible to damage as the treads. With C8075 stair risers, you can perfectly match your staircase’s current wood surface, and it’s simple to install replacements without redoing every panel. These riser boards for stairs come in your choice of red oak and white oak. Since they come in common sizes, they’re also great for converting a painted staircase into something that looks more natural.
These wood stair risers are 3/4 inches thick and 8 inches high. You can order these replacement staircase risers in 36-, 42-, 48-, 54-, 60- and 72-inch pre-cut lengths.
|
5010 Tapered Wood Baluster
The Crown Heritage 5010 baluster has a simple shape that looks elegant without being too
modern. It has a 1 ½ inch base that tapers gently to a standard point. While the manufacturer
says the tapered Crown Heritage stair baluster is colonial style, it fits into almost any stair
design.
The 5010 tapered wood baluster is available in 36, 39 and 42 inch lengths. Note that this is
the total length of this tapered wooden baluster for staircases, including the pin. Once
installed, the post will be ½ inch shorter. We offer the 5010 in beech and red oak. You can
also get a primed version ready to be painted to match the rest of your staircase.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5360: 1 3/4" Square Baluster. Available in 36" and 42".
|
5061: 1 1/4" Eased Edge Square Baluster. Available in 36" and 42".
|
5361: 1 3/4" Eased Edge Square Baluster. Available in 36" and 42".
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Crown Heritage 8070RTD Retro Tread Parts
Do you want the look of wood stair treads without completely rebuilding your staircase? These stair tread covers attach on top of your current treads, greatly simplifying renovations. You can install these retro treads for stairs over any type of tread, from carpet to hardwood. They’re only 11/16 inch thick, so they won’t affect the geometry of your staircase. This minimizes the impact on rise, so your stairs will still be comfortable to climb.
These red-oak Crown Heritage stair treads are available in 42- and 48-inch lengths. They have a total depth of 10.5 inches, with a length of 9 5/8 inches from the back edge to the inside of the trim.
|
C8070MR: Reversible Return Treads. 1-1/32" thick x 11-1/2" deep.
|
8070W34: Winder Tread with Two-Sided Nosing. 34" deep, 1 1/32" thick.
|
|
|
