|
|
|
|
|
|
|
|
|
|
|
|
|
8075: Riser. 3/4" thick x 7.5" high.
|
C8075 Stair Riser Boards
Riser boards are frequently bumped and kicked as people go up and down stairs, making them as susceptible to damage as the treads. With C8075 stair risers, you can perfectly match your staircase’s current wood surface, and it’s simple to install replacements without redoing every panel. These riser boards for stairs come in your choice of red oak and white oak. Since they come in common sizes, they’re also great for converting a painted staircase into something that looks more natural.
These wood stair risers are 3/4 inches thick and 8 inches high. You can order these replacement staircase risers in 36-, 42-, 48-, 54-, 60- and 72-inch pre-cut lengths.
|
8070: Plain Treads. 1-1/32" thick x 11-1/2" deep.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8070SG: Stain-Grade Plain Tread.
|
8078: Riser. 3/4" thick x 8" high.
|
8070HMR: Hybrid Mitered Tread. 1-1/32" thick x 11-1/2" deep.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8070SGMR: Stain-Grade Mitered Plain Tread.
|
8170: Plain Treads. 1-1/32" thick x 10-1/2" deep.
|
Crown Heritage 8070RTD Retro Tread Parts
Do you want the look of wood stair treads without completely rebuilding your staircase? These stair tread covers attach on top of your current treads, greatly simplifying renovations. You can install these retro treads for stairs over any type of tread, from carpet to hardwood. They’re only 11/16 inch thick, so they won’t affect the geometry of your staircase. This minimizes the impact on rise, so your stairs will still be comfortable to climb.
These red-oak Crown Heritage stair treads are available in 42- and 48-inch lengths. They have a total depth of 10.5 inches, with a length of 9 5/8 inches from the back edge to the inside of the trim.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8070MR: Mitered Tread. 1-1/32" thick x 11-1/2" deep.
|
8170MR: Mitered Treads. 1-1/32" thick x 10-1/2" deep.
|
C8070MR: Reversible Return Treads. 1-1/32" thick x 11-1/2" deep.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8070DMR: Double-Mitered Tread. 1-1/32" thick x 11-1/2" deep.
|
8070W: Winder Tread with No Nosing. 26" deep, 1 1/32" thick.
|
8070W34: Winder Tread with Two-Sided Nosing. 34" deep, 1 1/32" thick.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
C8010: Reversible Single End Starting Step. To be used with Standard Volutes and Turnouts. For use with 1-1/32" Stain Grade Tread / 7" Stain Grade Riser.
NOTE: 72" Maple and White Oak variants are Special Order. Please allow 4-6 weeks for delivery.
|
8015: Double Bull End Starting Step. To be used with Volutes and Turnouts. For use with 1-1/32" Stain Grade Tread / 7" Stain Grade Riser.
|
C8030: Half Circle Reversible Step. To be used with Post-to-Post systems and works well with Box Newels.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
C8015: Double End Starting Step. To be used with Standard Volutes and Turnouts.
|
8810/8910: Starting Step. To be used with Volutes and Turnouts. For use with 1-1/32" Stain Grade Tread / 8" Paint Grade Riser (8810), or 13/16" Stain Grade Tread / 8" Paint Grade Riser (8910).
|
8815/8915: Starting Step. To be used with Volutes and Turnouts. For use with 1-1/32" Stain Grade Tread / 8" Stain Grade Riser (8815), or 13/16" Stain Grade Tread / 8" Paint Grade Riser (8915).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8210: Bow Front Starting Step. To be used with Volutes and Turnouts. To be used with the Over-The Post system, although it is not required.
For use with 1-1/32" Stain Grade Tread / 7" Stain Grade Riser.
|
8010: Reversible Starting Step. To be used with Volutes and Turnouts. For use with 1-1/32" Stain Grade Tread / 7" Stain Grade Riser.
|
8215: Double Bow Front Starting Step. To be used with Volutes and Turnouts. To be used with the Over-The Post system, although it is not required.
For use with 1-1/32" Stain Grade Tread / 7" Stain Grade Riser.
|
|
|
