|
|
|
|
|
|
|
|
|
|
|
|
|
8075: Riser. 3/4" thick x 7.5" high.
|
8070: Plain Treads. 1-1/32" thick x 11-1/2" deep.
|
TUBE-050-96: Horizontal Tube Balusters provide a contemporary touch to a traditional design. Hollow round tubes feature a thin profile for an elegant finish. Tubes available 1/2 inch iinch x 8 ft and can be cut to a desired length. Fast and easy installation. Satin black or Ash Gray powder coat finish, stainless steel finish available. Please note: due to the 8' length frieght charges will apply.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TUBE-625: Horizontal Tube Balusters provide a contemporary touch to a traditional design. Hollow round tubes feature a thin profile for an elegant finish. Tubes available 5/8 inch iinch x 6 ft or 8 ft and can be cut to a desired length. Fast and easy installation. Satin black or Ash Gray powder coat finish, stainless steel finish available. Please note: due to the 8' length frieght charges will apply.
|
8078: Riser. 3/4" thick x 8" high.
|
C8075 Stair Riser Boards
Riser boards are frequently bumped and kicked as people go up and down stairs, making them as susceptible to damage as the treads. With C8075 stair risers, you can perfectly match your staircase’s current wood surface, and it’s simple to install replacements without redoing every panel. These riser boards for stairs come in your choice of red oak and white oak. Since they come in common sizes, they’re also great for converting a painted staircase into something that looks more natural.
These wood stair risers are 3/4 inches thick and 8 inches high. You can order these replacement staircase risers in 36-, 42-, 48-, 54-, 60- and 72-inch pre-cut lengths.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8070HMR: Hybrid Mitered Tread. 1-1/32" thick x 11-1/2" deep.
|
8070SG: Stain-Grade Plain Tread.
|
8170: Plain Treads. 1-1/32" thick x 10-1/2" deep.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8070MR: Mitered Tread. 1-1/32" thick x 11-1/2" deep.
|
8170MR: Mitered Treads. 1-1/32" thick x 10-1/2" deep.
|
8070SGMR: Stain-Grade Mitered Plain Tread.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8070SQ: Plain Square Edge Treads. 1-1/32" thick x 11-1/2" deep.
|
8070SQMR: Plain Square Edge Treads. 1-1/32" thick x 11-1/2" deep.
|
C8070MR: Reversible Return Treads. 1-1/32" thick x 11-1/2" deep.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8070W34: Winder Tread with Two-Sided Nosing. 34" deep, 1 1/32" thick.
|
8070W24: Winder Tread with No Nosing. 24" deep, 1 1/32" thick.
|
8010: Reversible Starting Step. To be used with Volutes and Turnouts. For use with 1-1/32" Stain Grade Tread / 7" Stain Grade Riser.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8015: Double Bull End Starting Step. To be used with Volutes and Turnouts. For use with 1-1/32" Stain Grade Tread / 7" Stain Grade Riser.
|
C8010: Reversible Single End Starting Step. To be used with Standard Volutes and Turnouts. For use with 1-1/32" Stain Grade Tread / 7" Stain Grade Riser.
NOTE: 72" Maple and White Oak variants are Special Order. Please allow 4-6 weeks for delivery.
|
8910: Starting Step. To be used with Volutes and Turnouts. For use with 13/16" Stain Grade Tread / 8" Paint Grade Riser (8910).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8810: Starting Step. To be used with Volutes and Turnouts. For use with 1-1/32" Stain Grade Tread / 8" Paint Grade Riser (8810).
|
8915: Starting Step. To be used with Volutes and Turnouts. 13/16" Stain Grade Tread / 8" Stain Grade Riser (8915).
|
C8015: Double End Starting Step. To be used with Standard Volutes and Turnouts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8815: Starting Step. To be used with Volutes and Turnouts. 1-1/32" Stain Grade Tread / 8" Stain Grade Riser (8815).
|
8210: Bow Front Starting Step. To be used with Volutes and Turnouts. To be used with the Over-The Post system, although it is not required.
For use with 1-1/32" Stain Grade Tread / 7" Stain Grade Riser.
|
C8030: Half Circle Reversible Step. To be used with Post-to-Post systems and works well with Box Newels.
|
|
|
|
|
|
|
|
|
|
|
|
8215: Double Bow Front Starting Step. To be used with Volutes and Turnouts. To be used with the Over-The Post system, although it is not required.
For use with 1-1/32" Stain Grade Tread / 7" Stain Grade Riser.
|
|
|
